FLK-MSC-325 Mechanical Splice Enclosures are designed for exterior installation including in manholes, mounted on outside walls, on top of poles, or most other typical cable joint locations, mechanical splice enclosure is an economical solution for fibre optic splice enclosures. The basic unit offers a 48-fibres capacity with storage of excess fibre, and larger units offer up to 288 fibers capacity.
The special design mechanical splice enclosure has a fully mechanical locking system which is durable through repeated opening and closing and is simple and easy to actuate. No dedicated tooling is required for assembling the enclosures beyond those found in any splice tool kit. The splice trays will accept a variety of fusion and mechanical splice protectors, including heat shrink fusion splice protectors and Fibrlock mechanical splices.
Water-proof design with IP-68 Protection level.
Integrated with flap-up splice cassette and adaptor holder.
Impact test: IK10, Pull Force: 100N, Full rugged design
All stainless metal plate and anti-rusting bolts,nuts.
Fiber bend radius control more than 40mm.
Full mechanical sealing mechanism
Full rugged design for underground, pole/wall mount
Stainless steel mounting brackets
2* Min-span cable ports for uncut cable (10-17.5mm)
6* Mechanical glands for distribution cable (8-17.5mm)
High density capacity Max. 288 cable splicing
Widely used in FTTH access network
Data communications networks
Local area networks
Direct buried, underground, hand-holes, duct mountig, wall mounting, pole mounting.
|Mid-span Cable ports||2* for uncut cable of 10-17.5mm|
|Output Cable ports||6*for cable of 8-17.5mm|
|Splice tray||24 Fibers|
|Number of Splice trays||1-12pcs|
|Max. Splice capacity||48-288 FO|
|Mounting type||Wall-mount or pole-mount|
|Color of Splice enclosure||Black|
Splice cassette and cable management tool, installation nuts and bolts, protection sleeves, hose clamp, cable tube, wreach, cover holder, rubber seal for cable entrance.
According to the size of table 1 of hanging wall with percussion drill play two holes on the wall, knock into the metal tube, will be installed back the case according to the punching position on the wall, and completely fixed screw.
Fix 1 set of the easy pole ring to the Telecom pole.