FLK-AFAT-326 Series Aerial Fiber Access Terminal Closure is a designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection.
Protection grade: IP65
The closure casing is made of industrial plastic PP-GE
Outdoor application and good UV resistance, Anti-ultraviolet,anti- impact and waterproof function;
Double sided drop cable outlets drop, cable can lead in at both sides.
3 layers structure, easy for future expansion and maintenance
Buckle lock design for the access for aerial installation
2 pcs of 1*8 or 1 pcs of 1*16 Splitter can be installed as an option
Support ADSS cable and self-support fiber cable
Fiber optic cable can go in and out of the box without cut the cable.
The application on NAP in the distributed split PON architecture.
Widely used in FTTH access network
Data communications networks
Local area networks
Arial, hand-holes, duct mountig, wall mounting, pole mounting.
Optical fiber radius of curvature: ≥40mm
Splice tray additional loss: ≤0.1dB
Temperature range: -40°C ~ +60°C
Anti side pressure: ≥2000N/10cm
Impact resistance: ≥20N.m
P/N and Specifications
|Cable diameter (mm)||Φ7-φ18|
2pcs 8-20mm round ports, 4pcs 5-16mm round cable,
16pcs 3-7mm drop cable ports
|2pcs 8-20mm round ports,4pcs 5-16mm round cable|
|Max. Split ratio||2pcs 1x8 steel tube splitter||1pcs 1x8 LGX splitter||N/A|
|Max. Adapter number||18pcs||9pcs||N/A|
|Max. Splice tray||1pc||4pcs|
|Max. Fusion splice||24 cores||96 cores|