Products
ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
  • ADSS Optical Fiber Cable-24 Fibers (SM G.652D)

ADSS Optical Fiber Cable-24 Fibers (SM G.652D)

Loose tube cable is a design that has high tensile strength and flexibility in a compact cable size. Our loose tube cable provides excellent optical transmission and physical performance.
Share:

Loose tube cable is a design that has high tensile strength and flexibility in a compact cable size. Our loose tube cable provides excellent optical transmission and physical performance.

Features

The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.

G.652D fiber use special spun device successfully controlled the value of PMD, and make sure that it keeps stable in cabling.

Approved by optical communication products ministry of quality supervision and inspection center, the connection between OFS fiber in and outside is good .The single-end connect-loss won’t be over 0.1 dB and the double-end connect-loss is all little than 0.05dB.

Apply to non-relay communication network. Features: proof test >1%.

Applications

ADSS optical fiber cable plays a significant role in the communication industry. Its usage is gradually increasing with more people choosing it in expense of other fiber cable. Some of its outstanding features have enhanced its demand throughout the market.This article analyses the key applications of the ADSS optical fiber cable. The research showed that, ADSS optical fiber cable’s demand is high particularly in areas of transmitting high-voltage power.

Specifications

G652D In cable 

CategoryDescriptionSpecifications
Before cablingAfter cabling
OpticalSpecificationsAttenuation @1310 nm≤0.34 dB/km (max.)≤0.36 dB/km (max.)
Attenuation @1550 nm≤0.20 dB/km (max.)≤0.22 dB/km (max.)
Attenuation @1625 nm≤0.23dB/km≤ 0.25 dB/km
Zero Dispersion Wavelength1300~1324 nm
Zero Dispersion Slope≤ 0.092 ps/nm2·km
PMD Link value (M=20cables Q=0.01% )maximum PMDQ0.2 ps/√km
Cable Cutoff Wavelength (λcc)≤1260 nm
Macro bending Loss(100 turns; Ф50 mm) @1550 nm(100 turns; Ф50 mm) @1625 nm≤ 0.05 dB≤ 0.10 dB
Mode Field Diameter @1310 nm9.2±0.4μm
DimensionalSpecificationsCladding Diameter125 ±0.7μm
Core/clad concentricity error≤0.5μm
Cladding Non-Circularity≤1.0%
MechanicalSpecificationsProof stress≥0.69Gpa

 Cable type: ADSS For Aerial & Duct installation cable

Dimension and Properties
General propertiesUnitNominal value
Fiber count (G.652D)PC24
Max. No of  loose tube / FillersPC6/0 
Fiber No. per tubePC
Central strength member/FRP*2.0±0.2mm
Aramid Yarn materialKevlar
Loose tubeDiametermm2.0±0.2

Material/PBT
Outer sheathThicknessmm1.8±0.2

Material/HDPE

Cable ODmm11.0±0.5mm
Max. allowable pulling forceN3000
Max.Crush resistanceN/100mm4000

Working conditions 

Working conditions
Temperature rangeTransport and storage:- 40℃ to +70℃Min Bending Radius
Installation:-40℃ to +60℃Installation:20 x OD
Operation:-40℃ to +70℃Operation:10 x OD

Note: 

1. the nominal outer diameter may vary by ± 5%.

2. The nominal cable weight may vary by ±10%. 

3. The nominal cable length each drum may vary by ±20%.