FLM-5100M 10100M Managed Media Converter

Overview:

FLM-5100M, a 10/100M adaptive fast Ethernet media converter with network management system, supports Web interface management, remote Telnet management & software upgrade, and serial port management & software upgrade, which can monitor working status and configure the modes of the local and the remote device. The 10/100M media converter completely complies with such international standards as 10Base-T, 100Base-TX, 100Base-FX and IEEE 802.3x, and is fully compatible with network interface cards, relays, hubs and switches of other manufacturers. It provides a low-cost and high-reliability hardware solution for information transmission in broadband private networks and fiber broadband metropolitan area networks.

 

Graphic management interface based on WEB address and SNMP protocol

Supporting LFP (Link Fault Pass Through) of the local and remote

The network interfaces of the NMS proxy module and NMS media converter module support the auto-sense of MDI-MDIX

Compliance with IEEE 802.3u 100BASE-FX/TX and IEEE802.3 10BASE-T

Supporting IEEE 802.1Q VLAN

Supporting 10/100M auto sensed, full/half-duplex auto sensed

Supporting the transmission of packets of 1600 bytes at the maximum

Supporting Quality of Service (Quos), and he transmission of VoIP packets

Supporting Spanning Tree Protocol (STP) to form a redundant network

Supporting hot swapping in the rack

Card type can be plug into both desktop box and the rack

Extremely low power consumption, low heat, reliable and stable performance, and long lifetime

Options in multimode dual fiber, single mode and single mode single fiber

Options in different types of optical interfaces such as SC, ST, etc